ELITE NDT ITALIANA

RED PENETRANT Red penetrant for high temperatures testing up to 200°C (400°F).

The NEW COIL BMS is ideal for the magnetic test on carbon steel pieces. It can be used for tests with dry powders or with liquid suspension powders and for de-magnetizing operations.

High intensity UV LED lamp (up to 7,000 μW/cm² at 38 cm/15 inches), with a very broad inspection area for a higher inspection productivity.

UV LED lamp conforms to ASTM E3022 and ROLLS-ROYCE RRES 90061, with an inspection area of over 20cm diameter (8 inches), minimum 1.000 mW/cm², for a higher inspection productivity.

High intensity UV LED lamp (up to 10.000 µW/cm² at 38 cm/15 inches), with a very broad inspection area of over 35 cm (13,8 inches) diameter for a higher inspection productivity.

Very high intensity UV LED lamp (over 10.000 μW/cm² at 38 cm/15 inches), with a very broad inspection area of over 40 cm (16 inches about - minimum 1.000 μW/cm2) diameter for a higher inspection productivity. Same characteristics of 12.120 Shuttle LED UV Lamp but featuring 5 high efficiency last generation UV LEDs, Certified for wavelength of 365 nm, to provide the broadest inspection area for a portable UV lamp in the NDT industry.

High intensity UV LED lamp (up to 5.000 mW/cm² at 38 cm/15 inches), with a very broad inspection area of over 25 cm (10 inches) diameter for a higher inspection productivity.

LED UV Lamp with spraying kit High intensity UV LED lamp (up to 9,000 μW/cm² at 38 cm/15 inches), with a very broad inspection area of over 15 cm (6 inches) diameter. Includes the one-operator spraying kit: one hand on the yoke and one hand to hold fluorescent spray can with integrated UV light.

Compact size high intensity LED UV lamp (up to 6,500 μW/cm² at 38cm distance), covers an area of approximately 25cm in diameter for increased inspection productivity.

POST-EMULSIFIABLE FLUORESCENT PENETRANT Type 1 - Method B,C,D - Sensitivity Level 4

POST-EMULSIFIABLE FLUORESCENT PENETRANT Type 1 - Method B,C,D - Sensitivity Level 3

POST-EMULSIFIABLE FLUORESCENT PENETRANT Type 1 - Method B,C,D - Sensitivity Level 2

SD1 WATER SOLUBLE DEVELOPER

ELITE DP9 DRY DEVELOPER FORM A

Elite E81B hydrophilic emulsifier (method D) is a concentrate to be diluted in water and used for washing Elite fluorescent liquid penetrants.

POST-EMULSIFIABLE FLUORESCENT PENETRANT Type 1 - Method B,C,D - Sensitivity Level 1